Suspended Solids Monitor Model 950

The Model 950 is an innovative suspended solids monitor which utilizes an insertion-type sensor. A submersible sensor is available for open channel applications. Since the sensor can be inserted in any size pipe, costly by-pass systems are not required. The design eliminates the effects of fluid color. In-situ measurements provide instantaneous accurate readings and a choice of isolated linear outputs is supplied as standard.

The Model 950 Suspended Solids Monitor uses a pre-focused incandescent lamp to direct a beam of light through the process fluid. Particulate matter in the fluid absorbs light in proportion to particulate concentration. The transmitted light is detected by a silicon detector which generates a current signal proportional to the particulate concentration. The electronic signal converter amplifies and scales the current signal to provide a readout on a meter and an isolated output signal.

Features include:

• Wide dynamic range (2000PPM up to 50% full scale)
• In-line measurements assure maximum accuracy
• Hot-tap installation permits uninterrupted flow
• Linear isolated output
• Optional alarms, battery power
• Use in any size pipe
• High accuracy and reliability
• Insensitive to visible colors, flow, temperature & pressure
• 2-position range switch
• One-year limited warranty

Download Model 950 Installation and Instruction Manual